1 pieces 5.95
2-4 pieces 5.50 ea
5-9 pieces 6.25 ea
10+ pieces 4.95 ea
LiteRays LED projection shot glasses project 7 different dazzling colors: red, green, blue, light yellow,
Cyan, pink and white. There is also a multimode color changing setting where the glass will slowly phase through all of the colors automatically. Simply push down on the shot glass to cycle through each color setting. This particular model projects a dahlia pattern all around the base of the shot glass. It runs on 2 common CR2032 batteries which are easily replaceable by removing the 2
screws and pulling away the silicone cover from the electronics.
Can you use your LiteRays for other things besides a shot glass? Of course! Since the shot glass portion easily removes from the projection base, the possibilities are largely limited to your imagination but here are just a few helpful suggestions:
- Use as a wedding plate centerpiece with candy inside or a small flower
- Use as a child's bedside night light
- Use as a light source inside a crystal votive holder
- Use as a name place holders at a dinner party
- Use as a patio lighting accessory
This
product can be customized with customer supplied images and/or text! Contact us for details.
Make your next special event a unique and memorable one with LiteRays
projection shot glasses! Click on the extended information tab above to see a detailed description for setting up and using your LiteRays shot glasses.
Like this product? We also sell LitePods which are a larger version of the shot glass without the 'glass' portion. The LitePod has a reusable sticky pad which easily adheres to the bottom of most any drinking glass. See our LitePod products HERE.
Bet you've never seen a shot glass like this!
Welcome
to a whole new experience of light! Your LiteRays product can be used fully as
a shot glass or you can remove the upper unit and use only the base as a
delightful design element.
To
assemble:
1.- Place
film into the bottom unit. You may need to adjust orientation for proper
projection.
2.- Place
LitePod into bottom unit with light facing down into the bottom unit.
3.- Attach
upper unit (drinking glass) to top of LitePod and make sure there is a secure
fit.
*Note:
Make sure that all 3 pieces fit securely together before use. When assembled,
the bottom unit is water resistant but not water proof so please take care to
avoid getting moisture in the bottom unit.
To turn
on:
Push down
on the top of the glass to turn the unit on to the first color. A second push
will turn the unit off. Continued pushes will take you through the 8 color
variations. Note: batteries may be replaced by removing the foam around the
electronics for access.
Care and
usage: (DO NOT WASH THE FULLY ASSEMBLED GLASS)
To wash,
the upper unit must be removed from the LitePod and HAND WASHED on its own. NOT
dishwasher safe! For the bottom unit, remove the film and hand wash. Please
note the bottom unit must be thoroughly dried before adding the film back in.
We
genuinely hope you enjoy your LiteRays products. Please visit directglow.com to
see other exciting LiteRays designs and product concepts.